STEP-BY-STEP INSTALLATION GUIDE
Everything you need to position your map correctly — in five simple steps, with no drilling on suitable smooth walls.
Before You Begin
Prepare the wall and arrange all map elements before you start. This will make the installation faster, easier and more precise.
✓ Clean, dry and dust-free wall
✓ All pieces arranged on a flat surface
✓ Installation plan ready
✓ At least 20 cm of space below the ceiling
STEP-BY-STEP
Follow the installation plan and build your wooden world map step by step. Take your time and check the position of each element before pressing it firmly against the wall.
Step 1 — Position the Cardboard Corners
Attach the left and right positioning corners to the wall at the same height. Keep the exact distance indicated in the installation plan for your map size.
Leave at least 20 cm between the top edge of the corners and the ceiling. The corners will establish the correct starting points for Alaska and eastern Russia.
Step 2 — Attach the First Map Elements
Place Alaska against the left positioning corner and eastern Russia against the right one. Align the wooden elements with the cut-out edges shown by the guides.
Check the position of both starting pieces carefully before pressing them firmly against the wall. They create the foundation for the rest of the map.
Step 3 — Build the Main Map
Continue adding the remaining map elements, moving gradually from the outer starting points towards the centre.
Use the included installation plan and measuring guide to maintain the correct spacing. Check the position of each element before pressing it firmly against the wall.
Step 4 — Add the Separate Elements
Once the main part of the map is complete, carefully remove the cardboard positioning corners from the wall.
Using the installation plan and measuring guide, add the separate elements: Greenland, Australia, Antarctica and the remaining islands. Check their spacing before pressing them firmly into place.
Step 5 — Complete the Final Details
Use the installation plan to position the compass, airplanes, ships, landmarks, ocean names and other decorative elements included with your map.
Step back and check the overall spacing and alignment. Once everything is correctly positioned, press each element firmly against the wall to secure it in place.
INSTALLATION COMPLETE
Step back and enjoy your finished Pinelini wooden world map. Add GeoTags to mark the places you have visited and the destinations still waiting to be discovered.
